UTC/GMT Conversion


Up Front





Glenn Hauser's SW/DX Report

Don Schimmel's Radio Intrigue

Joe Carr's Tech Notes

Radio Basics

Frequency vs. Wavelength

Modes and Modulation

Call Sign Prefixes

UTC/GMT Conversion

Radio Terms

Shortwave Radio

Introduction to Shortwave Listening

Tuning 150 kHz to 30 MHz

Selecting a Shortwave Radio

Reporting and QSLs

Receiver Reference

Modern Shortwave Receiver Survey

Favorite Tube-Type Shortwave Receivers

Scanner Monitoring

Introducing the "Action Bands"

The World Above 30 MHz

Selecting a Scanner

National Scanner Frequency Guide

Other Radio Hobbies

Ham Radio

AM Band DXing

Longwave DXing

Clandestine Radio

Pirate Radio

Numbers Stations


Radio Links

Shortwave Listening

Radio Clubs

International Broadcasters

Scanner Listening

Ham Radio

Web-Controlled Radios


Top of Page

UTC table

Since radio signals can cross multiple time zones and the international date line, some worldwide standard for time and date is needed. This standard is coordinated universal time, abbreviated UTC. This was formerly known as Greenwich mean time (GMT). Other terms used to refer to it include "Zulu time" (after the "Z" often used after UTC times), "universal time," and "world time."

UTC is used by international shortwave broadcasters in their broadcast and program schedules. Ham radio operators, shortwave listeners, the military, and utility radio services are also big users of UTC. All of the times and dates found here at DXing.com at UTC unless otherwise indicated.

Greenwich mean time was based upon the time at the zero degree meridian that crossed through Greenwich, England. GMT became a world time and date standard because it was used by Britain's Royal Navy and merchant fleet during the nineteenth century. Today, UTC uses precise atomic clocks, shortwave time signals, and satellites to ensure that UTC remains a reliable, accurate standard for scientific and navigational purposes. Despite the improvements in accuracy, however, the same principles used in GMT have been carried over into UTC.

UTC uses a 24-hour system of time notation. "1:00 a.m." in UTC is expressed as 0100, pronounced "zero one hundred." Fifteen minutes after 0100 is expressed as 0115; thirty-eight minutes after 0100 is 0138 (usually pronounced "zero one thirty-eight"). The time one minute after 0159 is 0200. The time one minute after 1259 is 1300 (pronounced "thirteen hundred"). This continues until 2359. One minute later is 0000 ("zero hundred"), and the start of a new UTC day.

To convert UTC to local time, you have to add or subtract hours from it. For persons west of the zero meridian to the international date line (which includes all of North America), hours are subtracted from UTC to convert to local time. Below is a table showing the number of hours to subtract from local time zones in North America in order to convert UTC to local time:

The second table is direct conversion from UTC to U.S.A. timezones.

Local Time Subtract from UTC:
Atlantic Standard
Four hours
Atlantic Daylight
Three hours
Eastern Standard
Five hours
Eastern Daylight
Four hours
Central Standard
Six hours
Central Daylight
Five hours
Mountain Standard
Seven hours
Mountain Daylight
Six hours
Pacific Standard
Eight hours
Pacific Daylight
Seven hours
Alaskan Standard
Nine hours
Alaskan Daylight
Eight hours
Hawaiian Standard
Ten hours

0000 8 PM 7 PM 6 PM 5 PM 4 PM
0100 9 PM 8 PM 7 PM 6 PM 5 PM
0200 10 PM 9 PM 8 PM 7 PM 6 PM
0300 11 PM 10 PM 9 PM 8 PM 7 PM
0400 Midnight 11 PM 10 PM 9 PM 8 PM
0500 1 AM Midnight 11 PM 10 PM 9 PM
0600 2 AM 1 AM Midnight 11 PM 10 PM
0700 3 AM 2 AM 1 AM Midnight 11 PM
0800 4 AM 3 AM 2 AM 1 AM Midnight
0900 5 AM 4 AM 3 AM 2 AM 1 AM
1000 6 AM 5 AM 4 AM 3 AM 2 AM
1100 7 AM 6 AM 5 AM 4 AM 3 AM
1200 8 AM 7 AM 6 AM 5 AM 4 AM
1300 9 AM 8 AM 7 AM 6 AM 5 AM
1400 10 AM 9 AM 8 AM 7 AM 6 AM
1500 11 AM 10 AM 9 AM 8 AM 7 AM
1600 Noon 11 AM 10 AM 9 AM 8 AM
1700 1 PM Noon 11 AM 10 AM 9 AM
1800 2 PM 1 PM Noon 11 AM 10 AM
1900 3 PM 2 PM 1 PM Noon 11 AM
2000 4 PM 3 PM 2 PM 1 PM Noon
2100 5 PM 4 PM 3 PM 2 PM 1 PM
2200 6 PM 5 PM 4 PM 3 PM 2 PM
2300 7 PM 6 PM 5 PM 4 PM 3 PM

A major source of confusion when using UTC is that the date also follows UTC. Suppose your local time zone is Central standard, and you want to hear a shortwave program scheduled to be broadcast at 0400 UTC Saturday. You do the math, and find that 0400 UTC is equal to 10:00 p.m. Central standard time. If you tune in at 10:00 p.m. on Saturday, however, you won't hear the program. Since the date is also UTC, you need to listen at 10:00 p.m. Friday to hear the program.

To hear the latest time in UTC, you can tune to stations WWV, in Fort Collins, Colorado and WWVH, Kauai, Hawaii on 2500, 5000, 10000 and 15000 kHz to hear the time announced in UTC each minute. WWV uses a man's voice to give the time, while WWVH uses a female voice. If you live in the central or eastern United States, and those frequencies aren't usable, you can tune to station CHU, in Ottawa, Ontario, Canada on 3330, 7335 7850 and 14670 kHz, to hear the current UTC time. If you're like many radio hobbyists, you will soon add a second clock set to UTC to your collection of radio gear. Click here for information on 24 hour clocks

1999-2009 by Universal Radio Research. All rights reserved.